Description

Fiamma F45 Eagle Awning

This is an automatic, self supporting motorhome awning without legs.

It is designed for wall installation and is supplied with fixing brackets to fit to a flat sided vehicle.

The 12V electric motor on the awning is operated by the included switch.   This is fitted onto the wall of the vehicle.

It comes as standard with Wind Detection System.  This incorporates a wind sensor that will activate the 12V motor and automatically close the awning in the event of strong winds, thus avoiding possible damage.

The awning can also be closed manually using the provided winding handle in case of emergency or power cut.

The self-supporting arms are reinforced thanks to the sturdy duralumin Double Block.

The angle of inclination of the arms is prefixed at 10 degrees, but can be changed according to the height of motorhome from 5° to 17°.  This enables the water to run off the canopy.

The awning has a double guide in the lead bar to allow two front panels to be fitted or other accessories.

The arms have cable ducts included so it is easy to fit the cables for LED lighting.  click here to view. 

To view or download the fitting instructions click here

Fiamma F45 Eagle Awning Measurements

Important Information: You must verify with your trusted dealer/fitter if your vehicle is suitable for the installation of the F45 Eagle with the sturdy full length aluminium bracket. The vehicle must be sturdy enough to support the weight and tension of the open awning due to it not having support legs.

Fiamma and Pioneer Leisure refuse all responsibility for any damage to the walls of the vehicle or for water ingress caused by incorrect installation or due to the awning being fitted on unsuitable vehicles.  Please check with a qualified fitter as to suitability.